Skip links

Head Office: P.O. Box: 11005, RAK, UAE

Facebook-f Instagram Linkedin-in
RAKAM | RAK Adhesive & Waterproof Materials
Awaiting product image

RAKAM Top Coat Clear

Rakam best, high gloss or matt clear Emulsion paint, based on highly modified pure acrylic resin specially formulated for use on all types of
interior and exterior surfaces such as concrete, wall papers, masonry, and gypsum.

Main Features
  • Excellent scrub resistance and highly washable.
  • Excellent weathering resistance.
  • Excellent durability and scratch resistance.
  • Smooth and flexible.
Enquire Now
Technical Datasheet
1 Step 1
Enquire Now
reCaptcha v3
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
FormCraft - WordPress form builder
Category:

Description

Physical Specification

Specific gravity Approx. 1.01 g/cc
Solid by volume Approx. 37%
Coverage rate 10-12 M²/Liter
Dry film thickness 30 Microns
Shelf life 12 Months
Flash point Not applicable
Finish Gloss or Matt
Drying time at 25 °C Surface dry: approx. 1 hour, Hard dry: 3 – 4 hours

* A second coat can be applied after 4 hours…

Surface Preparation

The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…

A. Old Painted Surfaces

  1. Remove the old paint as much as possible.
  2. Sand the entire surface and remove all the dust.
  3. Wash down with Ammonia Water Solution.
  4. Rinse with clean water and allow to dry.
  5. Prime the surface to be painted with RAKAM Latex Sealer.
  6. Fill cracks and holes with RAKAM Wall Putty or RAKAM Acrylic Filler.
  7. After drying, sand the putty and clean the surface once again.
  8. Apply one coat of RAKAM Texture or Tex Coating.
  9. Apply two coats of RAKAM Top Coat clear.

A. New Surfaces

  1. Sand the surface until completely smooth, remove all the dust.
  2. Prime the surface to be painted with RAKAM Latex Sealer.
  3. Apply 1-2 Coats of RAKAM Wall Putty or RAKAM Acrylic Filler.
  4. After drying, sand the putty and clean the surface.
  5. Apply one coat of RAKAM Texture or Tex Coating.
  6. Apply two coats of RAKAM Top Coat clear.

Instructions for use

Air spray (Hopper Gun)

Type of thinner Clean Water
Percentage of thinning 10 – 15% max. by volume
Nozzle orifice 0.015″ – 0.018″
Output pressure 5 – 6 bar

Air Spray Gun

Type of thinner Clean Water
Percentage of thinning 10 – 15% max. by volume
Nozzle orifice 1.5 – 2.0 mm
Output pressure 2 – 3 bar

Brush / Roller

Type of thinner Clean Water
Percentage of thinning 10 – 20% max. by volume

Packing

18 Ltr./drum, 1 US gallon

Remarks

  • Stir well before use…
  • Avoid application below 5 °C or over 85% relative humidity.
  • After using, clean the application tools immediately with water.
  • Close container after use.
  • Store in a cool and dry place.
  • Keep out of reach of children.
  • For more information, please do not hesitate to contact our Technical Department.

Related Products

Call Now Button