Skip links

Stellar Tex Fine

A decorative and protective, high build textured finish based on acrylic co-polymer and special fine quartz intended for use on interior and exterior walls, ceilings, masonry, precast concrete panels and gypsum boards which yields a beautiful fine textured finish.

Main Features
  • High film thickness without any cracks.
  • Different patterns can be obtained.
  • Excellent adhesive strength.
  • Excellent coverage to minor substrate defects.
  • High permeability.

Description

Physical Specification

Specific gravity Approx. 1.65 g/cc
Solid by volume Approx. 73%
Coverage rate 0.5 – 1.0 Kg./M² depends on the required texture
Dry film thickness Depends on the method of application and required texture
Shelf life 1 Year
Flash point Not applicable
Finish Matt
Drying time at 25 °C Surface dry: approx. 2 hours, Hard dry: approx. 12 hours

* A second coat can be applied after 24 hours…

Surface Preparation

The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…

A. Old Painted Surfaces

  1. Remove the old paint as much as possible.
  2. Sand the entire surface and remove all the dust.
  3. Wash down with Ammonia Water Solution.
  4. Rinse with clean water and allow to dry.
  5. Prime the surface to be painted with STELLAR Primer Sealer or STELLAR Latex Sealer.
  6. Fill cracks and holes with STELLAR Wall Putty or STELLAR Acrylic Filler.
  7. After drying, sand the putty and clean the surface once again.
  8. Apply two coats of STELLAR – Tex Fine.

A. New Surfaces

  1. Sand the surface until completely smooth, remove all the dust.
  2. Prime the surface to be painted with stellar Primer Sealer or stellar Latex Sealer.
  3. Apply 1-2 Coats of stellar Wall Putty or stellar Acrylic Filler.
  4. After drying, sand the putty and clean the surface.
  5. Apply one coat of stellar – Tex Fine.

Instructions for use

Air spray (Hopper Gun)

Type of thinner Clean Water
Percentage of thinning 0 – 5% max. by volume

Special Roller

Type of thinner Clean Water
Percentage of thinning 0 – 5% max. by volume

Subsequent Coats

  • Stellar Gloss Emulsion
  • Stellar Acrylic Emulsion
  • Stellar Polyurethane Gloss Enamel 2K

Colours

White and Light shade colors

Packing

28 Kg./drum

Surface Preparation

  1. Sand the surface until completely smooth, remove all the dust.
  2. Prime the surface to be painted with stellar Primer Sealer or stellar Latex Sealer.
  3. Apply 1-2 Coats of stellar Wall Putty or stellar Acrylic Filler.
  4. After drying, sand the putty and clean the surface.
  5. Apply one coat of stellar -Tex Fine.